Ceramic Coating - Sonax Profiline Ceramic Coating CC Vinyl+PPF - Complete kit (1-step sealing)

Long-lasting 1-step sealing for colored films and paint protection films on vehicles. The flexible structure creates a strong bond to the film and provides excellent water and dirt repellent properties. Enhances color depth on both glossy and matte films without altering the gloss. Gives the film a pleasant soft feel. Set with 4 applicators.

Ensure good ventilation during use. For best durability, the film must be clean, dry, and free from grease and dirt. Apply the sealant in a shaded area to avoid too rapid drying. Test the product on an inconspicuous area first.

INSTRUCTIONS FOR USE:

1. Clean the film thoroughly. Surfaces must be absolutely clean just before sealing.
2. Spray Sonax Profiline Prepare (237300) onto a microfiber cloth and wipe all surfaces to be treated thoroughly.
3. Apply CC Vinyl+PPF to the light side of an application pad and apply plenty of liquid in a cross pattern on the film. The treatment area should be about half a square meter (1/4 hood). Ensure even application, as many films are very absorbent, which can result in spots or unevenness (High Spots).
4. Immediately wipe off excess product with a Sonax Coating Towel or microfiber cloth without leaving streaks. If the applicator begins to harden during use, simply use a new pad.
5. Once the entire vehicle has been treated in this way, the sealant must cure for at least 6 hours. During this time, the vehicle should remain in a clean and dry environment, and the surfaces must not be touched. For optimal effect of the product, we recommend letting the sealant rest for 12 hours to ensure a complete reaction with the film.